EA FIREBIRD XL

EA FIREBIRD XL

EA FIREBIRD XL Specifications:

• Wingspan: 2.6m / 102 Inches
• Length: 3.1m / 122 Inches
• Weight: 46-51lbs dry depending on turbine
• Power: 210N-320N

ARF Kit Includes:

• Hardware
• Linkages
• 7.0L Conformal Fuel Cells (3) built and plumbed and installed
• Stainless dual wall thrust pipe
• Electron landing gear ER 50 with SmartBox
• Standard wing, vertical, and horizontal stabilizer covers
• Carbon Fiber wing, vertical fin and stab tube.
• Full doors, mains and nose all installed and hinged
• Full bypass setup with inlets.  inlets are installed

PNP Kit Includes:

• (11) Pre-installed EA HV servos 36 KG and 55KG for flaps
• All linkages installed and connected
• 7.0L Conformal Fuel cells installed and all fuel line ran with vent
• UAT installed
• Wire harness installed
• Wiring completed with connectors and wire loom. Wiring is labeled and run to equipment tray
• Installed Bypass and Stainless dual wall thrust pipe
• Electron ER 50 landing gear with Smartbox controller installed
• Add receiver, gyro, turbine, and batteries.
• Standard wing, vertical and horizontal stabilizer covers
• Carbon Fiber wing and vertical and horizontal tubes
• Some modeling experience is required with PNP products.  Our products are built by skilled factory workers, who are not modelers, so please go over every nut and bolt before flights.  Some bolts may still require locktite.
• True Turn key services are available in USA starting at $1500 and up.

Kit Features:

• Extensive Pre-fabrication
• Painted outside mold with clear coat finish
• Very light all composite sandwich layup
• Two-piece fuselage disassembles easily
• Removable vertical and horizontal stabilizers with one bolt
• Carbon fiber reinforcement throughout
• Carbon fiber wing and spar tubes
• Fuselage, wing, rudder and stab covers
• Diverse speed envelope, highly maneuverable while maintaining outstanding slow speed performance
• All doors are hinged and ready for servos
• Intakes are installed.
• Fuel tanks are installed

Pricing:

• Introductory ARF price $7495(Electron landing gear ER50 and Smartbox controller)
• Introductory PNP price $9995 $ (Electron landing gear ER 50 and Smartbox controller)
• Custom paint schemes available for $500 and up. 
• FireBird Bird scheme is $800 additional, TransAm scheme is $950 additional.  stock scheme is below.
• DHL shipping available 
• Sea Shipping available 

Optional Accessories:

• Custom Pipe upgrade 210 size- $400, 320 size- $495
• Smoke tank and smoke hardware $179
• Digitech UAT 160 $115,  UAT 180 $129
• Revoc wing/stab/rudder bags in black, red or grey $400 Fuselage bag $400
• Light sets starting at $399
• Custom build service $1500 and up depending on options
• Discount HV servos packages available
• Kingtech Turbines available
• DHL Air Shipping is available
• Sea freight shipping available 
• EA 36 KG BL HV servos $169, EA 55KG BL HV servo $199
• Custom Wire Harness with lights wiring $350
• Cockpit tub and clear canopy glass $299

 Servo pockets are standard size 20mm x 40mm, so oversized servos will require some adjustment of pockets to fit.

Linkages

Aileron 80 MM x 2 

Elevator 100 MM x 2

Flap 85 MM x 2

Rudder 120MM x 1

Steering 50 MM x 1

Main doors 65-70MM x 2

Nose Door 55-60MM x 1

Servo arms

Aileron: 1.5” arm on inner hole

Elevator: 1.5” arm on inner hole

Flap: 1.0” arm on inner hole cut tip of arm off

Rudder: 1.5” arm on inner hole

Main doors 1”

Nose door 1.50” arm on inner hole

CG:

Aircraft CG range: 291-318 mm (from wing L.E. at wing root)

Use batteries on battery tray for balance.  No lead needed.

Throws:

Aileron: 20-25mm/from tip.   low/high

Flaps:  full 95mm from aileron.  Mix 3-4mm down elev. with full flap. Take off flaps 25mm from aileron

Elevator: 15.0-20 mm from tip

Rudder:  55mm plus from base

Differential: 0%

Schemes:

https://www.dropbox.com/scl/fo/67z0umgouhx94x8lo9b0r/AFBLiDPT18nAhs-83TmuB7k?rlkey=rnq1kxqmhs0mh0lh7q9qkqvt2&st=a8vbdd9z&dl=0